Signal Noise Soundsystem

Custom hybrid sound system
SNR=Psignal/Pnoise

contact: snsoundsystem@gmail.com
-silk screen printing
``...Before printing occurs, the frame and screen must undergo the pre-press process, in which an emulsion is 'scooped' across the mesh and the 'exposure unit' burns away the unnecessary emulsion leaving behind a clean area in the mesh with the identical shape as the desired image. The surface to be printed is coated with a wide 'pallet tape'. This serves to protect the 'pallet' from any unwanted ink leaking through the screen and potentially staining the 'pallet' or transferring unwanted ink onto the next substrate.``
MHB48 & Mid / Front Loaded Horn

Akadimia Platonos/August 2017

Celestion 21 x 2

Category of diameter 21 inch / 53.5 cm
Magnet type: Neodymium / Shape: Cylindrical
Nominal power handling: 1700W
Max power handling: 3400W
Frequency range: 30-1000 Hz
Voice coil former: Glass fiber
EBP: 125
EBP = Fs / Qes is a number which shows the trade-off between efficiency and bandwidth of a driver. It is useful in determining if a driver is suited for a sealed or vented box and is also used to determine suitability for horn loading.

Hybrid

MHB48x4

MHB48

Ntamaria Sxisto

3d visuals

by MANA RAVER @ Embros

SN Pack T-Shirts & Hoodies
Buy
Soundcheck Mid/Front Loaded Horn

- Enclosure type : Front loaded horn

- Sensitivity :
- by unit : > 105 dB/1w/1m
- by stack of 2 units : > 108 dB/2w/1m (1w by voice coil)

- SPL continuous :
- by unit : ~132 dB/1600w/1m
- by stack of 2 units : ~135 dB/1000w/1m (500w by voice coil)

GATE E1 PORT
Signal Noise Soundsystem wall
4/4 Front loaded horn in process.
``Properly designed horns have the effect of making the speaker cone transfer more of the electrical energy in the voice coil into the air; in effect the driver appears to have higher efficiency.``
-silk screen printing
``...Before printing occurs, the frame and screen must undergo the pre-press process, in which an emulsion is 'scooped' across the mesh and the 'exposure unit' burns away the unnecessary emulsion leaving behind a clean area in the mesh with the identical shape as the desired image. The surface to be printed is coated with a wide 'pallet tape'. This serves to protect the 'pallet' from any unwanted ink leaking through the screen and potentially staining the 'pallet' or transferring unwanted ink onto the next substrate.``
Limmer 042 Horn in process

2 x Limmer 042 Horns with Eighteensound 6``
hornflare with phase plug & B&C 1`` horn are
ready to cover up to 18.000 Hz.

ASKT Live 3d Visuals

by Didi Bat & MANA RAVER

Signal Noise Soundsystem Wall

@ ASKT

This website uses cookies to improve your experience. Cookie Policy